The main function of vacuum packaging is to remove oxygen to help prevent food deterioration. The principle is relatively simple, because food spoilage is mainly caused by the activities of microorganisms, and most microorganisms (such as molds and yeasts) require oxygen to survive. , and vacuum packaging uses this principle to remove oxygen from the packaging bag and food cells, so that microorganisms lose the environment for survival. Experiments have shown that when the oxygen concentration in the packaging bag is ≤1%, the growth and reproduction speed of microorganisms decreases sharply.
Contact Now
1. This sealing machine is mainly used for heating and sealing composite film materials and plastic bags with polyolefin (such as polyethylene, polypropylene, etc.) as the inner layer.2. Composite film sealing includes cellophane sealing, aluminum foil sealing, spray aluminum coating sealing, polyester sealing, nylon sealing, polyethylene sealing, polypropylene sealing and other material sealing.3. The thickness of the film and the width of the seal can be applied within a certain range, and good and uniform linear sealing can be achieved.4.
Contact Now
The belt conveyor has strong conveying capacity, long conveying distance, simple structure and easy maintenance, and can easily implement programmed control and automatic operation. The continuous or intermittent movement of the conveyor belt is used to transport items below 100KG or powdery and granular items, and its operation is high-speed, stable, low noise, and can be transmitted up and down the slope.
Contact Now
· New horizontal design, light and convenient, automatic pumping, and a hopper can be added for thicker pastes.· Manual and automatic switching function: When the machine is in the "automatic" state, the machine will operate at the set speed.· Automatic and continuous filling. When the machine is in the "manual" state, the operator steps on the pedal to achieve filling. If he keeps pressing the pedal, it will also become an automatic continuous filling state.
Contact Now
Pillow packing machine is a kind of packaging capacity is very strong, and can be suitable for a variety of specifications for food and non-food packaging continuous packaging machine. It can not only be used for the packaging of non-trademark packaging materials, but also can be used for high-speed packaging of roll materials pre-printed with trademark patterns.
Contact Now
The fully automatic boxing and packaging machine integrates a full set of processes including material transportation, sorting and arrangement, precise boxing, sealing and bundling, to achieve a seamless and continuous operation from product input to finished packaged product output.Accurate packing: Relying on high-precision visual recognition and positioning systems, combined with fine-tuning of the mechanical structure, after in-depth "learning" of product size and shape, ensure that the products are neatly arranged in the carton and the quantity is accurate.Model number：BLMC-100A
Contact Now
The overall structure of the fully automatic blister packaging machine is compact and reasonable. It uses high-quality metal materials to build a solid frame to ensure the stability of the equipment when running at high speed. Its design follows the principles of ergonomics and the requirements of efficient production processes.Efficient and automated production: It realizes fully automated continuous production from blister forming, material filling, sealing to cutting, with fast packaging speed and high production efficiency.
Contact Now
Small liquid filling machine, is the use of electric, crank, the most mature technology piston structure design of automatic quantitative liquid dispensing machine, suitable for hospital preparation room, ampoules, eye drops, all kinds of oral liquid, xeline bottle, pesticide bottle, special bottle shampoo and various water agent quantitative filling; At the same time, it can also be used for quantitative continuous addition of various liquids in various chemical analysis tests, especially suitable for liquid packaging of large, medium and small pesticide factories.
Contact Now
The explosion-proof spray handling robot is a high-tech automated equipment designed for spraying and handling operations in hazardous environments. It combines advanced explosion-proof technology, precise spraying technology and efficient handling capabilities, and can operate safely and stably in special industrial fields such as petroleum, chemical industry, and military industry where there are flammable and explosive risks, providing reliable protection for the production operations of enterprises.1.
Contact Now
The multifunctional horizontal wrapping machine is a high-performance equipment that integrates a variety of advanced packaging technologies. It is designed to meet the diverse and efficient packaging needs of modern industry.
Contact Now
In the working process, the robot is usually equipped with a variety of sensors, such as position sensors, force sensors, etc. These sensors can monitor the position and motion state of the robotic arm in real time and transmit feedback to the control system. The control system adjusts the motion of the robot arm according to the feedback information to ensure the accuracy and stability of the painting operation.
Contact Now
During the welding process, the robot will precisely control the welding parameters to ensure the stability of the welding quality. It can use different welding methods according to different welding requirements, such as MIG welding, TIG welding and so on. At the same time, the robot is also equipped with an advanced sensor system that can monitor various parameters during the welding process in real time, such as welding current, voltage, welding speed, etc., and adjust them according to needs.
Contact Now
Industrial robots are multi-joint manipulators or multi-degree of freedom machine devices widely used in the industrial field, with a certain degree of automaticity, can rely on their own power energy and control capabilities to achieve a variety of industrial processing and manufacturing functions. Industrial robots are widely used in various industrial fields such as electronics, logistics, and chemical industry.
Contact Now
Core working principle: The sensor detects the passing of the product and transmits a signal back to the labeling control system. At the appropriate position, the control system controls the motor to send out the label and attach it to the position of the product to be labeled. The product flows through the labeling device, and the label is covered and attached.
Contact Now
Core working principle: the parting wheel will separate the products and put them on the conveyor belt, the sensor detects the product passing, returns the signal to the labeling control system, and the control system controls the corresponding motor at the appropriate position to send the label and attach it to the product to be labeled, the product flows through the labeling device, the labeling belt drives the product to rotate, the label is rolled over, and the attaching action of a label is completed.Operation process: Put the product (put in the blanking box) - > Separate the product
Contact Now
Fully automatic labeling machine mostly uses high-quality stainless steel or aluminum alloy to build the frame body. Through precision welding, CNC machining and other processes, it ensures that it has excellent rigidity and stability, and can withstand vibration, impact and corrosion of various chemical substances during long-term and high-intensity operation.It integrates high-precision gear sets, synchronous belt drives and ball screw drives.
Contact Now
The belt conveyor is mainly composed of two endpoint rollers and a closed conveyor belt tightly sleeved on them. The roller that drives the conveyor belt to rotate is called the driving roller (transmission roller); the other roller that only changes the direction of movement of the conveyor belt is called the redirecting roller. The driving drum is driven by an electric motor through a reducer, and the conveyor belt is dragged by the friction between the driving drum and the conveyor belt.
Contact Now
The roller conveyor is suitable for transporting various types of boxes, bags, pallets and other items. Bulk materials, small items or irregular items need to be placed on pallets or in turnover boxes for transportation. It can transport a single piece of material with a large weight or withstand a large impact load. The roller lines are easy to connect and filter. Multiple roller lines and other conveyors or special machines can be used to form a complex logistics transportation system to complete various process needs. .
Contact Now
Chain plate conveyor can meet the requirements of beverage labeling, filling, cleaning and other equipment for single column transportation, but also can make a single column into multiple columns and walk slowly, thereby generating storage capacity, to meet the requirements of sterilization machine, bottle storage table, cold bottle machine for a large number of materials, we can make the head and tail of the two chain plate conveyor into a overlapping mixed chain, The bottle (tank) body is in a dynamic and excessive state, so that the bottle is not stranded on the conveying line, and the pre
Contact Now
The chain plate conveyor is composed of a power unit (motor), a transmission shaft, a roller, a tensioning device, a sprocket, a chain, a bearing, a lubricant, a chain plate, etc. The two main parts that drive the transportation of materials are: the chain, which uses its cyclic and reciprocating motion to provide traction power; and the metal plate, which serves as the carrier during the transportation process.
Contact Now
An unmanned baler for tic-tac-toe packaging suitable for customers with limited space and low speed requirements. The machine automatically carries out parallel two-channel packing jacking drum for jacking turning, reverse conveying to the baler, and then carries out parallel two-channel packing to form tic-tac-toe packing.
Contact Now
Hydraulic baler performance:1. Replaceable cutters are installed above and around the fuselage.2. The body is welded with high-quality carbon structural steel, and the compression chamber and the front feed gate are equipped with wear-resistant steel plates to ensure durability.3. The size of the charging box and the shape and size of the packing block can be customized according to the customer's raw material specifications.4. By hydraulic drive, automatic choice of manual or PLC operation control.5.
Contact Now
When a joint in the arm of a multi-joint robot rotates at an Angle, the other joints and their connecting rods will produce a movement in space. Accordingly, the claw reaches a new position, and the direction (attitude) of the position is also changed. Therefore, the general multi-joint robot needs to be controlled by computer. The robot has Angle detectors on each joint. Given the rotation Angle of each joint, the problem of obtaining the spatial position and attitude of the hand claw is called the analysis problem of motion control.
Contact Now
The automatic pillow packing machine uses the variable frequency stepless speed regulation motor to operate, and drives the toothed chain CVT to rotate the gearbox box through the speed regulation of the gearbox chain, so that different running speeds are obtained and then transmitted from the synchronous belt to the planetary differential mechanism, so that the paper film conveying length is adjusted, and the output shaft of the gearbox drives the paper film press roller to rotate the paper film through the chain transmission.
Contact Now
